So, you decided to install a Netgear Nighthawk extender to increase the network range? But, why you are unable to get mywifiext setup Is your extender unable to find the router? Fret not! After implementing the hacks mentioned in this post, your extender will not only be able to find the router but also set up the WiFi device easily. So, read on.
Why Netgear Nighthawk Extender Can’t Find Router?
Prepping for the troubleshooting process will give you more strength to eliminate the issue. Thus, give a quick read to the points mentioned below and learn why your Netgear Nighthawk extender can’t find the main router:
You are giving a shot to improper setup instructions
The Nighthawk device is present outside the range of the main router
You might not be using an upgraded version of the internet browser
The cable connection shared by your Nighthawk range extender and the main router is weary
A lot of infected files are present on the device you are using to set up the extender
So, these were the potential causes behind the issue in discussion. Considering that you are now familiar with them, it is time to step and learn how to do away with the issue like a professional.
Fixed: Netgear Nighthawk Extender Can’t Find Router
Use the Correct Instructions
Whether you are setting up the Netgear Nighthawk extender via mywifiext.net or using the Nighthawk mobile application, you are supposed to follow the correct setup process. Perhaps, you are not attentive enough. So, we’ve summed up the Netgear extender setup instructions again:
Switch on your WiFi devices (here Netgear Nighthawk extender and router).
Connect both devices. The choice of connection source is all yours.
Launch a web browser (computer) or Nighthawk app (mobile).
Log in using the default values of your Nighthawk extender.
Select the network you wish to extend (your router SSID) and follow the on-screen prompts.
Are you unable to see the host router SSID on the dashboard of your extender? If not, then it is a sign that you pay attention to the following hack.
Bring Router Close to Extender
Consider pulling your host router a little closer to your Nighthawk WiFi extender. This way, both devices will be able to communicate with each other properly. But, there’s a catch when it comes to maintaining distance between the host router and the range extender.
You are not allowed to place your WiFi devices too close. Why we are saying that? It is because when the distance between devices is too less, they will hardly communicate. Can you read a book placed at a distance of 0 cm from you? The same is the scenario with the Netgear Nighthawk extender. Thus, maintain the safe value of the distance.
Update the Internet Browser
Sometimes, it is an internet browser that creates the Netgear Nighthawk extender can’t find router issue. It is because the older the browser version, the more lack of the latest features. Thus, consider upgrading the internet browser to the latest version introduced. Clearing its cache and cookies will be a wise idea. Doing so will prevent the browser from loading a cached version of the Netgear Genie setup page.
In case you are making use of the Nighthawk mobile application, then consider updating it. Just like the web browser in the manual method, an outdated version of the Nighthawk app can also create hurdles for the extender when it comes to detecting the main router.
Get Rid of Weary Ethernet Cable
Apart from communicating wirelessly, your Netgear Nighthawk extender and the host router also share a wired connection. It’s a universal rule that a worn-out cable won’t be able to do its job properly. Have you also used a weary Ethernet cable for direct communication between your extender and router? If yes, then change it right away.
Swapping the Ethernet cable will be of no good if you’ve not established a finger-tight connection between your devices. Thus, be sure of the same and see if your extender finds the router this time.
Delete Infected Files
Setting up a Netgear WiFi range extender after the detection of your router will become a task next to impossible for you if the device (computer, laptop, or mobile) used in the process is infected with viruses.
Thus, what you are supposed to do is detect the presence of infected files on your device using antivirus software and delete them.
The Netgear Nighthawk extender can’t find router issue can stop you from configuring your device. We are hopeful that with the help of the tactics discussed above, you will be able to set up your extender via 192.168.1.250 mywifiext.net, or the Nighthawk app.